WL-5460AP v2
WL-5460AP v2
WL-5460AP v2
WL-5460AP v2

WL-5460AP v2

Punto de acceso 802.11g multi función inalámbrica

Resumen de características
  • Punto de acceso 802.11g multi función inalámbrica
  • puertos 3 x 10/100Mbps, 2MB Flash, 16MB SDRAM
  • alimentación a más de 26dBm (Sudamérica) y conector antena R-SMA
  • 7 modos de operación inalámbrica
  • Control de banda ancha y alineación de antena para Site Survey
  • aislamiento del cliente, watchdog, y regulador de alimentación Tx
The AirLive WL-5460AP is the world's most popular multi-function 802.11b/g Access Point that operates in 2.4GHz frequency bands. It features incredible 8 wireless operation modes for all types of wireless operations.
7 Modos Inalámbricos
El WL-5460AP v2 posee un firmware de 7 increíbles modos.
Modo AP: El WL-5460AP v2 es el concentrador central de todos sus dispositivos inalámbricos.
Modo Puente: Para conectar dos redes LAN inalámbricas.
Modo Cliente: Convierte el WL-5460AP v2 en una tarjeta inalámbrica de tal manera que se puede conectar con puntos de acceso remotos.
Repetidor WDS: Para incrementar la cobertura inalámbrica de un Punto de Acceso/Enrutador con características WDS.
Repetidor Universal: La function repetidor, única de AirLive, permite que el WL-5460AP v2 extienda la cobertura de su Punto de Acceso/Enrutador ¡incluso si éstos no tienen función WDS!
WISP + Repetidor Universal: El modo WISP + Repetidor Universal permite compartir la conexión WISP tanto en el lado alámbrico como en el inalámbrico de la red.
WISP+Universal Repeater : The WISP+Universal Repeater mode let you share WISP connection on both wireless and wired side.
AP Router : The WL-5460AP is working as a wireless router. The LAN2 will become the WAN port.
Aislamiento del Cliente Inalámbrico
El WL-5460AP v2 posee la nueva función de Aislamiento del Cliente Inalámbrico previamente disponible sólo en puntos de acceso más costosos. Cuando Ud. active esta función los clientes inalámbricos no pueden verse unos a otros, por tanto, esta es una importante función para una oficina y un operador de sitios calientes (Hotspot) ya que protege la seguridad de sus clientes inalámbricos.
Timeout ACK y Regulación de la Potencia de Transmisión
El WL-5460AP v2 tiene la función de timeout ACK que le permite ajustar el valor de timeout para operaciones de larga distancia. Además 5 niveles de ajuste de la potencia de transmisión permiten que Ud. encuentre la antena conveniente para el cumplimiento de la ley. La habilidad para definir valores más bajos de potencia de transmisión de salida es también crucial si Ud. desea hacer corresponder el punto de acceso con el amplificador de potencia
Características de Seguridad Extendidas
El WL-5460AP v2 soporta las funciones de seguridad WEP, WPA y WPA2. Además el WPA empresarial en el autenticador 802.1x está implementado en los modos Puntos de acceso y WDS. La combinación de encripción, SSID escondida y control de acceso impiden la entrada de intrusos a su red inalámbrica.
Sea en la oficina o en el hogar, la familia 802.11g de AirLive brinda el máximo rendimiento y seguridad a las redes de alta velocidad inalámbricas de hoy.
* Antes de configurar la regulación de potencia de transmisión, por favor limpie primero las cookies de su PC.
 
Diagrama de Aplicación
Características  Funciones de Punto de Acceso, Puente, Cliente y Repetidor
 Modo Enrutador Cliente WISP 
Modo WISP + Repetidor Universal
 Antena desmontable, 2 puertos LAN
802.1x, WPA, WPA2 y Administración Web
 4 niveles de Regulación de la Potencia de Transmisión
 Función Watchdog que utiliza PING
 Aislamiento del Cliente Inalámbrico (e8 firmware)
 Ajuste ACK Timeout
 Función de DHCP de Relay
 Protección 802.11g
Hardware 2 puertos LAN de 10/100Mbps 
2MB Flash, 16MB SDRAM
 Antena con puerto SMA invertido
 Indicadores LED de Alimentación, LAN, WLAN
Antena  Antena desmontable bipolar de 2dBi 
 Conector SMA Invertido
Rango de Frecuencia  EEUU (FCC) 11 Canales: 2.412GHz~2.462GHz
Europa (ETSI) 13 Canales : 2.412GHz~2.472GHz 
Sensibilidad Rx @ 25°C
IEEE 802.11b
Min (dBm)
1Mbps
-91
2Mbps
-90
5Mbps
-90
11Mbps
-86
IEEE 802.11g
Min (dBm)
6Mbps
-87
9Mbps
-87
12Mbps
-86
18Mbps
-84
24Mbps
-82
36Mbps
-78
48Mbps
-73
54Mbps
-70
Técnicas de Modulación
 Multiplexación por División Ortogonal de Frecuencia 11g (64QAM, 16QAM, QPSK, BPSK)
 Spread Spectrum de Secuencia Directa 11b (CCK, DQPSK, DBPSK)
 Rata de Datos: 54, 48, 36, 24, 18,11, 5.5, 2, 1 Mbps
Potencia de Salida EU and FCC version
- 20dBm Max
- Adjustable in 6 levels
Brazil version
- 26dBm Max
- Adjustable in 8 levels
Modo WISP  Soporte de Autenticación DHCP, PPTP, L2TP, PPPoE ISP 
 Función de Cliente Inalámbrico como WAN
 Modo WISP no es el mismo que el Modo Enrutador
 Para configurar el Modo WISP, su PC debe estar conectado al puerto LAN
Seguridad 64/128-bit WEP
 Soporte WPA/WPA2-PSK
Soporta Radius 802.1x 
 Soporte WPA Empresarial en los Modos AP/WDS
Configuración  Administración Web
 Modo WDS (Puente, Cliente, Repetidor)
 ESSID escondida
802.1x
 Control de Acceso MAC 
 Tabla de Acceso MAC 
 Aislamiento del Cliente Inalámbrico (e8 firmware)
SSID, Canal, RTS Threshold, Frag Threshold
Ambiente  Temperatura Operacional: 0~60℃
 Humedad Operacional (sin condensación): 20~80%
 Temperatura de Almacenamiento: -20~65℃
 Humedad de Almacenamiento: 95% Max
Fuente de Poder DC12V
EMI FCC, CE
Peso del Producto (g) 180 g
Tamaño del Producto
( L x W x H (mm) )
135 x 100 x 26mm


Software & Firmware

  • ETSI firmware, Airlive WL-5460APv2_e19 Details 2013/05/09
  • SA firmware, Airlive WL-5460APv2_e19 Details 2013/05/10
  • EU Firmware version e19_b3, Add Disable NAT and Wireless Client Limit functions, Details 2011/08/22

FAQ

  • I want to connect to the internal server from internet. What can I do? Details
  • I have a ISP’s wireless signal near my house, how could I connect WL-5460APv2 to internet? Details
  • I have a ISP’s wireless signal near my house, how could I connect WL-5460APv2 to internet? Details
  • When I login the HTTPS web management, there's a message about wrong security certificate ,what can I do? Details
  • I have a remote AP ,how to extend the coverage of the remote AP by WL-5460APv2? Details
  • Why can't I get into the web management , even I press the reset button to reset WL-5460APv2 to factory default setting? Details
  • The value of the signal level in the site survey window ,is it a percentage or dBm? Details
  • What color of the WL-5460AP’s LED turn on? Details
  • Why can't I proceed the emergency function? Details
  • My computer or mobile phone has MAC address starting with something not "00", but I can't seem to add the MAC address to the Access Control List? Details
  • What are the available Telnet and SSH commands? Details
  • What is the default IP address of my AP? Details
  • Where can I find the wireless MAC adress of my AP? Details
  • When I change the WL-5460AP to "AP Router" mode, which LAN port will become the WAN port? Details
  • I tried to use the Emergency Upgrade procedure to restore firmware. But the process failed in the middle. What is wrong? Details
  • "I have 2 x WL-5460APv2 which are placed in different rooms, the link is O.K. but I felt the signal strength is not strong enough. So I change the original 2dBi antenna to WAI-08 8dBi rubber dipole antennas. Then, the link got very unstable. What is the problem? " Details
  • The Bridge mode Setup Guide. Details
  • I am trying to use the WL 5460AP as a WDS repeater, I have some questions: 1. must the SSID the same as the SSID of the AP? 2. How should I configure the DHCP? Details
  • How to secure network with WL-5460AP ? Details
  • I was configuring AirLive 802.11G Wireless AP (WL-5460AP v2), Its quite working over Universal Repeater Mode however when I used WISP and WISP + Universal Repeater Mode I was not able to find the SSID over the wireless. What should be the setting for this, our setup from our source AP was IP authenticated. Details
  • How do I configure QoS for WL-5460AP or WL-5470AP new firmware? Details
  • How to configure 5460APv2 x 3 to work in point to multipoint mode? Details
  • I have a modem of my ISP installed at home. I want to connect my WL-5460AP v2 to it, so need to connect one of the two Ethernet ports of the back of the WL-5460AP to the modem exit (Ethernet port). Only 1 IP address comes out of the modem, so I have a modem of my ISP installed at home. I want to connect my WL-5460AP v2 to it, so need to connect one of the two Ethernet ports of the back of the WL-5460AP to the modem exit (Ethernet port). Only 1 IP address comes out of the modem, so the WL-5460AP needs to behave as router as well. Can it be done and if so, which settings do I need to select to:(1)  Use it as a router (providing IP addresses to the multiple PC’s that want to connect to the WL-5460AP(2)  Can I still also use the second Ethernet port to connect a wired PC to the WL-5460AP? Details
  • WL-5460AP Telnet Command Guide (Firmware e11 or later) Details
  • I have tried to upgrade the WL-5460AP to the 3rd party firmware. But it doesn't allow me to upgrade. What should I do? Details
  • I use WL-5460AP as AP mode, connect directly to a RADIUS server by an Ethernet cable. I want to use RADIUS server for authentication, what do I provide as information? Details
  • The data rate rating only represent the physical layer data rate. But what is the actual throughput for the IEEE Wireless Standards? Details
  • How to set subnet in my PC or NB when I want to enter AirLive product's Web UI ? Details
  • When I set my AP's TX power to level1, the connection is unstable? Details
  • After having upgraded firmware 5460APv2_e10.1 or newer, I set "Wireless Client Isolation" to ENABLE. But clients devices can still see each other. What should I do? Details
  • I heard WL-5460AP has emergency code function that can restore the machine after firmware crashed. How can I use it? Details
  • I download the new WL-5460APv2 firmware. But when I set the the device to AP, Client, or Repeater mode. My PC can't get on the Internet. Why? Details
  • I download the new WL-5460APv2 firmware. But I can't get into the AP's remote management or Ping to the AP from the wireless side? Details
  • When my AP is installed in an outdoor area with a lot of 2.4Ghz traffic, my AP's signal become unstable sometimes Details
  • When I try to enter the MAC address in the WDS field, the Web browser tell me I entered the wrong format. Details
  • When I try to use web management. My browser ask me for Username, what is it? Details
  • The MAC address on the device label is wrong? Details
  • How does the watchdog function works? Details
  • Why is my AP not stable? Details
  • How come the WDS repeater function between WL-5460AP and WIAS-1000G are not working? Details
  • How come the TX power regulation doesn't seem to work correctly? Details
  • My wireless transfer is very unstable or stopped sometimes. Details
  • Why does my AP or Wireless Router doesn't work with Centrino? Details
  • How can I extend the distance using extra AP? How can I create a wireless repeater(WDS)? Details
  • How many users can we link to an access point? Details
  • When I surf the Internet, I can ping but I can't surf some websites. Why? Details
  • What is AdHoc and Infrastruture ? Details
  • What is WEP encryption? Details
  • How can I change to a different wireless network in WinXP? Details
  • In some wireless devices, the ESSID (SSID) is case sensitive Details
Modelo Nº
WL-5460AP v2 802.11g Wireless Access Point, South America
Código EAN
  13 Code 14 Code
WL-5460AP v2 4719869612908 14719869612905
Embalaje estándar
Tipo de embalaje  packing box
Tamaño del embalaje 60 x 170 x 245 mm
Peso del embalaje 0.9 kg
Contenido del embalaje WL-5460AP, CD-ROM, Quick Setup Guide, 12V Power adapter, Antenna, RJ-45 Cable, Wall mounting kit
Caja de embalaje
Cantidad 20
Dimensiones 50 x 35 x 36.5 cm
Peso 19 kg
Top