Airlive is a well-known IP Surveillance Network solutions, Network Device, Security products provider

Buscar Soporte

Soporte

Preguntas frecuentes

Firmware y driver

Hojas de especificaciones

QIG

Guías de usuarios

Calculadora de ancho de banda y almacenamiento

Lista de compatibilidades

Declaración CE

Código GPL

SDK

Interface Web

Resultados

Q:	How to enable SD-Card recording on SC-300W SmartCube camera?

A:

Please refer to the attached file.

Download

Q:	Why do I not get an IP address when using a WIFI connection?

A:

Please refer to the attached file.

Download

Q:	How to setup Gmail when receive failed message?

A:

Please cilck the PDF file.

Download

Q:	How can I get the people counting report or temperature/humidity report?

A:

Please refer to the attached file.

Download

Q:	How can I get the people counting report or temperature/humidity report via Mobile?

A:

Please refer to the attached file.

Download

Q:	How to create App for Dropbox?

A:

Please refer to the attached file.

Download

Q:	Why can I not change my IP address from DHCP to Static?

A:

Please refer to the attached file.

Download

Q:	Why does SmartCube 300W switch day and night mode continuously?

A:	Please don’t put any object in front of the camera in one meter, or camera faces to the white color wall in 1.5 meter.

Q:	When I want to add Smart Cube 300W into AirLive APPCAM app, what I should select “Wired” or “Wireless” in the app?

A:

Please refer to the attached file.

Download

Q:	The temperature and humidity values appear to be incorrect?

A:	It take about 5 minutes after power up for the temperature and humidity value to reach equilibrium. Please read the values after the initial power up period. In addition, the operating temperature range is between -5 to 55 degree Celsius.

Q:	How can I see the temperature and humidity values remotely?

A:

Please refer to the attached file.

Download

Q:	I tried to download the iOS APP but the link doesn't seem to work

A:

Please refer to the attached file.

Download

Noticias de soporte

How to enable SD-Card recording on SC-300W SmartCube camera?

How to Clear all devices from the Gateway with SmartLife Plus APP?

The siren is not displayed in the APP.

I do not see the sensors or actuators in the APP.

How to replace the battery in the SI-102?